The 1998 Blazer is capable of driving off-road.
The 1998 Chevy Blazer was manufactured in two-wheel and four-wheel coerce models with either a five-speed textbook transmission or a four-speed book transmission. It was further specious in two and four door models with both having a backseat with amplitude for three passengers. The vehicle has a 4.3-liter V-6 engine, and it features bent steering, air conditioning and a rear storage world. Troubleshoot the Blazer by monitoring the engine performance and production basic mechanical observations.
Instructions
1. Own the electrical operation professionally serviced whether the gauges fail, the hazard lights fail, the engine shuts down down the security step or the brakes randomly engage without Chauffeur work. All of these problems are traced to issues in the electrical action and many are associated with recalls.
The injectors must be replaced whether they are leaking.3. Propel the vehicle and scanner the engine for force as you accelerate. The fuel pump must be replaced whether the engine sputters and fails to provide energy relative to the proportions of energy placed on the gas pedal.2. Disinfected the fuel injectors whether the engine cranks however does not inauguration. The injection method can emerge as clogged with grime and can fail to provide fuel to the engine. And evaluation the injectors for leaking fuel.
Also monitor the Blazer for steering difficulty. Replace the power steering pump if the steering wheel is stiff and requires a large amount of strength to turn.
4. Monitor the transmission performance as your drive. If the transmission slips, fails to shift or grinds, it must be flushed and refilled with new fluid. If the problem continues, the transmission may require a rebuild. Also pay attention for pulling to one side after shifting out of four-wheel drive. The 1998 Blazer may stick in four-wheel drive, causing you to shift in and out until it disengages.
5. Inspect the engine for leaks and check the fluid levels. If the fluids are low and major leaks are evident, inspect further for blown gaskets. The manifold gasket and intake gasket will cause engine failure if the seal breaks. Replace the gasket and the fluids to solve the problem.
