A vehicle radiator is a bottom line item of the vehicle cooling course. The radiator keeps the vehicle engine from overheating during transaction. It and protects the machine from the greatest heat produced by the engine. Rust and sludge Testament eventually habitus up in the radiator, which Testament negatively influence the radiator advantage. These can again damage the radiator, provided left unchecked. Usual radiator flushing is any of any vehicle prolongation programme, not individual to conduct the radiator in shape, however too to prolong the entity of the radiator.
Instructions
1. Emptied the hood of your vehicle, followed by the radiator cap. Be undeniable the engine has completely cooled, before opening the radiator cap.
2. Allot the radiator drain plug, create under the radiator. Abode the empty pan under the radiator drain plug.
3. Filter the radiator, by opening the radiator withdraw plug, using a wrench or Phillips screwdriver. The coolant inside the radiator is poisonous, so wear waterproof gloves when opening the radiator filter plug. Reinstate the radiator withdraw plug, after the radiator has drained.
4. Transfer the used coolant in the remove pan to the used coolant container. Dispose of the used coolant properly.
5. Fill the radiator with the radiator flush concept, using the funnel to avoid any spills, while pouring in the radiator flush solution. Fill the remainder of the radiator with water. Close the radiator cap.
6. Start the vehicle, and leave it running, until the vehicle has reached its normal operating temperature. Turn on the heater, and set to the hottest position. Continue to run the vehicle for another 10 minutes.
7. Turn the vehicle off, and let the vehicle completely cool down, before draining the radiator flush solution. Open the radiator cap when the radiator is cool to the touch.
8. Place the drain pan under the radiator drain plug. Repeat Step 3 and Step 4 to drain the radiator flush solution from the radiator.
9. Stop adding water when the coolant level in the radiator has stabilized.10. Screw on the radiator cap until it is tight, and check for any leaks from the radiator and radiator drain plug. Fill the radiator with a 50/50 mixture of distilled water and coolant. Start the vehicle, and observe the coolant level in the radiator. Add distilled water to the radiator whenever necessary to raise the coolant level in the radiator.
Close the hood, and turn off the vehicle.
