Diverse matters could originate a vehicle not to begin.
The starter is constrained for cranking your engine when you turn on the ignition important. This helps to bring your engine to vitality. Whether you suspect the starter of not working true, you necessity to troubleshoot the starter before replacing it, because many at odds components as well the starter could reason your vehicle not to begin.
Instructions
1. Domicile a voltmeter on the battery To gauge the voltage output of the battery. Provided the battery reads less than 12 volts, charge the battery and then header to begin the vehicle. Whether you are in a speed, end a yoke of jumper cables and connect the battery on your machine with the battery from a working car. This eliminates your battery from the equation. If the car still does not start, move to the next step.
The post on the left goes to the ignition switch. The post on the right has a jumper wire connected to it that goes to a connector located on the starter. Place the metal part of an insulated screwdriver against both connectors. This keeps the solenoid from engaging.
3. Locate the two posts located on the back of the starter solenoid. The solenoid bolts onto the starter.2. Turn on your headlights and then turn the ignition switch in an attempt to begin the vehicle. If the lights dim, the ignition is working properly because it is attempting to send power from the battery to the starter. If the lights do not dim, the issue is with the ignition and not the starter. Have a second person attempt to begin the vehicle. The motor inside the starter should start to hum. If the starter motor does hum, the starter is okay and the starter solenoid is defective. If the starter motor does not turn on or it runs rough, the starter is defective.
