When filmmaking, you must balance your camera on a jib crane rig.
This article Testament occurrence you centre a jib crane for a movie Industry using counter weights.The jib-crane rig can be untrue or purchased. Whether you get it, it Testament comprehend a plate to attach to your tripod. By calculating the weight of the camera, you can add counter weights to properly balance your camera on the rig.
Most tripods administer a levelling bubble. This is so you can equable away your tripod by floating the bubble in district between the indicators. Fluid-head tripods authorize you to wield the bubble by centering the belief using levers.
Instructions
1. Contingency of a flush and bubble.Allot your tripod up with the legs stretched as far as imaginable.2. Attach your jib arm to your tripod by using the plate that comes with tripod, normally used for the backside of a camera. This plate should attach to a plate or platform on the front of your jib-crane rig. This is where your camera Testament sit.
3. Attach your camera to the plate rests in the front of the jib arm. The tripod plate should screw correctly into the backside of your video camera. Attach the camera by securing the plates.
4. Calculate the weight for the jib. Normally you can complete this by adding weight, evenly on both sides of the back end of the jib arm. Add weight until the camera floats evenly.
A general rule is to multiply the weight of the camera by 5. For instance, most consumer digital video cameras weigh about 7 pounds. 7 pounds times 5 is 35. Sometimes you have to take off weight or add weight to receive it perfect.
5. Add weights to the back arm of the jib crane.This should balance the arm, leaving the camera hovering about eye level. Once you have centered your weights, you can now maneuver the camera up and down and side to side
