The Dodge Troop was anterior introduced in 1983. Coincidentally, that was the exact corresponding year halogen capsule headlights were permitted in the U.S. Although the old-fashion sealed-beam units would ultimate a unusual expanded agedness during the Industry of the Troop, the capsule would inevitably replaced the sealed beam. They are brighter, behind longer and keep the intellect to be aggrandized effortful to alter. Nowadays, the sealed-beam units are unusual in any vehicle and all late-model Caravans act halogen capsules.
Sealed-Beam Unit
Although the sealed-beam unit headlight was easier to exchange than most halogen capsules, they took up a piece another period when replacement was required.
The retaining bell or bezel needed to be removed with a Phillips sense screwdriver. Although relatively elementary, there were downsides to this diagram. Unless employing a magnetic-tipped screwdriver, the bezel-retaining screws could be dropped during the extraction. Another disagreement was folk not clever which were bezel-retaining screws and which ones were headlight habituation screws. Paying interest to reality was required.
Once the two upper and two lower bezel screw are removed, the sealed-beam was gratuitous to extract from the headlight cavity. The harness was unplugged for the headlight, and the advanced one was installed by reversing the procedure.
Halogen Capsule Headlight
Some of the earlier design Caravans required removing the headlight meeting bezel To admit costless movement in the headlight meeting. Visible retaining screws for the meeting bezel were quite visible and accessible. Unlike replacing the sealed-beam headlights, the hood was then required to be open to obtain access to the back of the headlight assembly and extract the bulb capsule.
In recent models, three retaining screws are present along the radiator rail that hold the headlight assembly into place. Removing these screws will allow you to unseat the headlight assembly once
Once the retaining screws are removed and the retaining clips unseated, manipulate the headlight assembly forward. Obtaining access to the back of the headlight assembly is now achievable.
Unplug the headlight wiring from the harness. Oils and alkaline in our skin can compromise the protective glass bulb and create heat spots along the glass. This can severely lessen the amount of time the capsule will last or render it useless altogether.
Turn the headlight socket retaining ring a quarter-turn counterclockwise. This will release the bulb capsule from the inside of the headlight assembly.To reinstall, reverse the procedure, but never touch the glass bulb of the new halogen replacement.
