Replacing the starter on your Lexus GS400 is not a laborious operation, and still someone without any involvement working on a van can complete this in approximately one and a half to two hours. You conscientious committal to comprehend a inconsiderable approximately buying the parts. For instance, one business nation discharge is acquire remanufactured parts instead of Trade-mark advanced ones as a cost-saving degree. Remanufactured parts are a bigger possibility than their rebuilt counterparts considering remanufactured parts incorporate all contemporary internal parts.
Reconnect the transmission cable bracket onto the starter and tighten it with the wrench. Put the automatic transmission cable back into place and connect it to the transmission.7. Reattach the negative battery cable and tighten the nut with the wrench.
Disconnect the automatic transmission shift cable from the transmission. The cable is black or silver, and you have to manipulate it to disconnect it from the lever.
3. Remove the transmission cable clamp from the starter with the wrench. Label the electrical wires on the starter with a marker and masking tape according to their proper locations. Disconnect the wires with the wrench to remove the nuts. Unplug the wiring harness from the starter.
4. Unscrew the bolts from the starter with a socket and ratchet. Pull the starter away from the engine.
5. Install the new starter on the engine. Tighten the bolts with the socket and ratchet. Plug the wiring harness back into the solenoid then reconnect the other wire with the wrench to tighten the nut.
6.
Instructions
1. Pop the hood on the automobile and disconnect the abrogating battery cable with a wrench to loosen the aficionado and pull the terminal outside from the battery.2.Crank the engine to test the starter installation.
