Repair surface damage to fiberglass panels to dash off your vehivle beholding as admirable as inexperienced.
Fiberglass surfaces consist primarily of immature glass fibers bundled in a resin compound and then moulded into shape. One of the exceeding current uses of fiberglass is in the creation of vehivle parts, from hoods to fenders to doors. With this convenience, fiberglass surfaces can suffer a Broad array of damages, such as scratches and cracks. Happily, fixing a fiberglass surface is an little channels, requiring mostly that you remove the protective coating and then fill any scratches and cracks before reapplying the coating.9. Wet-sand the panel using 2,000 grit sandpaper to a mirror shine. Do not touch the panel for three hours as the paint completes the curing process.
Disinfected the scratched or cracked environment with an Car entity cleaner and a sponge. Scrub outside any dirt or debris and then rinse the surface using Disinfected flood. Pat the surface dry with a towel.
2. Prepare the sphere for repair. Sand the surface of the scratch or the line of the crack so that it's all the more with remainder of the fiberglass surface, extending the sanded field for two inches surrounding the damaged universe. Sand down ended the emulsion under the primer layer to the fiberglass itself.
3. Brush the surface using acetone placed on a Disinfected rag to remove any loose fibers. Fill the scratch using fiberglass filler. Author a alloy containing 97 percent filler with three percent cream hardener. The hardener is generally included with the filler. Manipulate a putty dagger to fill the damaged area and then scrape the universe smooth with the knife-edge. Wait one hour for the filler to dry.
4. Paint the patch the same color as the surrounding surface. Apply a layer of sandable polyester primer using a brush, then spray a layer of black lacquer paint over the primer. Allow the primer to dry overnight.
5. Wet sand the primer with 220 grit sandpaper until the surface is smooth. Apply a second layer of the black paint and wait overnight for it to dry.
6. Wet-sand the second layer of paint with 400 grit sandpaper to create a flawless surface. Use a tack cloth to remove any sanding residue.
7. Spray a finishing coat of paint the same color as the surrounding fiberglass surface on the patched area. Apply the coat in three separate layers. Allow two hours drying time between layers.
8. Finish the repair by spraying on a layer of clear coat paint for protection. The clear coat should cover the patch and remove any lines between the patched area and the old paint surface. Cover the entire patched panel with the clear coat. Allow the clear coat a full night to cure.
It can be a interval consuming course, however once completed, the repaired surface generally looks as beneficial as latest, with no these days noticable memo of the repair specious.
