Monday, September 14, 2015

Replace One Of The Wheels Stud Inside A Ford Explorer

Sometimes you may strip a revolve stud when you alternate the tire on your Ford Explorer. Smack the stud with a mallet. Drive the stud out the back. Remove it and replace it with a new one. Push the new stud through until enough threads sput a wheel bolt on it.


Instructions


1. Obtain a latest stud. Purchase the alike dimensions stud that's already on the vehicle. Receive it off and yield it with you when you invest in a fresh stud whether you're not trustworthy of the bigness.


2. Inspect under the carpeted floor in the contents sphere. The jack is ultimate the rear seat on account of environment under the floor lid. You extremity to uplift the SUV when you alter the wheel stud for a Ford Explorer. Be sure to block the diagonal wheel before you use the jack.


3. Jack up the SUV and take out some of the brake fluid to avoid overflow. Remove the caliper and rotor. Use support to protect the line rather than letting it dangle. If the rear brakes are drums, take off the drum. You may need to disconnect the emergency brake cable in the rear.


4. Locate an area behind the hub that you gives enough clearance to drive the stud out and allows you to put a new one back in with ease. If there's no way to do it, take off the hub and put it in a vise.


5. Whether this happens, you want to alter the revolve stud as soon as feasible. You desideratum the exactly tools and some education approximately the brakes in aligning to comprehensive the bother. Provided you aren't experienced, dash off certain you construct a diagram as you remove the parts.


6. Put a wheel bolt onto the end of the stud that comes out of the opening toward you. Make sure the slanted edges face you. Tighten these down and, as you do, notice how they pull the stud through the hole. Keep tightening and adding more bolts until the stud seats flat against the hub in the back.


7. Take off the bolts and put all the parts back on in reverse order that you took off to replace the stud on your Ford Explorer. Make sure you add more brake fluid and bleed the brakes before you finish.