Tighten Brake
Wrinkle Trimmings
2. Slide the line wrench over the fitting on the brake line. The line wrench must fit tightly on the fitting with no play whatsoever--if the wrench has some room between it and the fitting, change to the correct wrench; otherwise you risk rounding off the fitting.3.
Establish the brake borderline that you want to tighten on the vehicle using a flashlight. To tighten the fitting, you must rotate it counterclockwise. Although this seems obvious, depending on your position Towards the fitting, determine which way that is so you don't loosen the fitting accidentally.
Brake lines are used to associate the crack cylinder to the braking systems on a vehicle, nevertheless the Trimmings on the ends of the lines are false of a quite soft metal, which makes removing or loosening them exhausting. Putting a traditional wrench on the Trimmings can round them off, forming Emigration or tightening impossible; the correctly tools are indispensable for this occupation.
Instructions
1.Push or pull the wrench to turn it counterclockwise until you can't apply anymore pressure. Once it's in place solidly, test the brakes and make sure there are no visible leaks.
