Solenoids are a critical Element of the ignition advance in automobiles. The engine should restart immediately without a problem.
Diagnosing the Problem
The solenoid is connected to the Ford's battery and electrical devices, including the ignition. Provided there is a occupation with any of the machine's electrical components, the solenoid could be to blame. The most conventional solenoid hitch in a Ford is restarting the van while the engine is all the more Boiling. Provided the automobile easily restarts when the engine is cooled for 30 minutes, it viable funds that the solenoid is overheating. Another telltale notice that a Ford solenoid is acting up is when turning the ignition crucial does not bow the engine and the interior lights don't flicker or turn off.
Observation
Grill a colleague to begin your Ford's engine by turning the ignition. With the hood unlatched, ticker the starter (located near the battery). Whether it does not spin, there are two potential problems. It could be that the capacity running to the starter solenoid is inadequate, or it could selfish that the competency is reaching the solenoid on the contrary not arriving at the Engine. The easiest means to fix upon the problem is to turn on the Ford's interior lights and start the car again. If the starter doesn't spin and the lights don't dim, the solenoid isn't getting enough power. You'll need to replace either the ignition switch, the starter relay, the transmission safety switch, the solenoid itself or the wiring connecting them. If the lights dim during this test, you'll need to examine the battery cables and the battery itself.
Replacing the Solenoid
Once you've isolated the solenoid as the root of your car trouble, you'll need to replace it. Replacing a Ford's defective solenoid requires access to the battery, ignition and transmission. Before starting, consult your Ford's service manual or purchase a Chilton replacement. This will act as the roadmap to your engine components to make sure you don't disconnect the wrong wires. Disconnect the battery terminals and proceed to remove the old solenoid starter. Once it is removed, you will need to mount and attach the new solenoid using cables that fit properly. Test the solenoid by turning your ignition with the interior lights on. If the Ford starts and the lights do not dim or turn off, take the car for a significant ride. Once the car's engine is hot, return to your driveway and turn it off completely. Extremely admitted as starter relays, solenoid starters jumpstart the Engine with electric happening from the battery when the ignition clue is turned. Ford solenoids are among the most accepted starters in the car Production in that they are connected directly to the battery, giving ample influence when starting the vehicle. Unfortunately, allying all van parts, Ford solenoids are even prone to malfunctions that can garner an otherwise roadworthy vehivle stuck in the driveway.
