The Ford Ranger is mid-size Motor lorry avowed for activity reliable and cohesive. The Edmunds website paper money that "a well-maintained late-model Ford Ranger makes for a respectable Election in the used vehicle marketplace." Nevertheless all the more the toughest trucks won't be able to secure your item provided the door locks aren't working. The Ford Ranger has a key-style door lock on all doors, extremely as on the tailgate. Correct preservation and consideration of these locks Testament fit further and continued security for your factor and the vehicle itself.
Instructions
Removing the Lock
1. Insert the key into the lock cylinder and make sure that it operates correctly.8. Press the door panel onto the door. Apply slight pressure to pop the plastic retainer clips back into their holes using the palm of your hand. Fix the arm rest to the side.
2. Detach the door grip Mug by removing the mounting screw with a Phillips screwdriver. Remove the window Eccentric person mounting screw using a Phillips screwdriver. Pull the window crank off the splined shaft.
3. Pry a flat-head screwdriver between the door panel and the door and push outward to release the plastic retainer clips. Pop the clips out one at a time to reduce damage to them.
4. Pull the door panel off and set it aside away from the work area. Unhook the door latch rod from the retaining clip.
5. Slide the lock cylinder retainer away from the lock cylinder using a pair of pliers. Pull out the door lock cylinder.
Installing the Lock
6. Insert the new lock cylinder into the lock cylinder hole from the outside of the Ranger. Slide the lock cylinder retainer onto the lock cylinder using a pair of pliers. Make sure that the lock cylinder is seated properly.
7. Reconnect the door latch rod to the retaining clip. Lawns the Ranger on a even surface and shut off the engine. Roll your window up to its abundant vastness. Remove the three screws holding the arm rest to the door panel using a Phillips screwdriver.
9. Reattach the window crank. Reinstall and tighten the window crank mounting screw with a Phillips screwdriver.
10. Reattach the door handle cup, securing it by tightening the mounting screw with a Phillips screwdriver. Reattach the arm rest, securing it by tightening the mounting screws with the Phillips screwdriver.
11. Roll the window up and down to ensure that it's operating properly.
