Propane torch showing connected fuel canister.
The regulator that connects a propane torch to the liquid propane fuel cylinder controls the power of the Gauze flow to the torch gratuity. This safety side prevents the torch from raging away of government, and the regulator will shut down the torch whether the Gauze vigour suddenly surges. The compel of propane Gauze varies with a numeral of factors, including the proportions of Gauze in the receptacle and the exterior temperature. Whether the regulator will not attempt, stab troubleshooting the Element before buying a replacement.
Instructions
1. Shut off the Gauze flow by turning the stud on the side of the torch regulator clockwise.
2. Unscrew the propane canister from the regulator, leaving the regulator attached to the torch. Research the weight of the canister to be certain you are not simply away of propane. Compare the canister to another of the twin magnitude that you understand is unabridged.
4. Poke the end of a safety pin into the small hole on the side of the regulator below the torch nozzle. Work the pin around in a circle and side to side to dislodge any dirt or other material that might be clogging the system.5.
3. Turn the stud on the regulator counterclockwise to unlocked and bleed out the system. Any air trapped in the regulator will flow out through the torch. If the regulator feels unusually cold or is frosted, let the component come to room temperature.
Blow compressed air into the regulator hole.
6. Reconnect the propane canister and try igniting the torch in the normal manner. If the regulator still will not operate, you may have a broken or malfunctioning internal valve stuck in the closed position. Do not attempt to disassemble a bad regulator. Replace the part instead.
