The 2005 Ford Explorer's blinker bulbs are within a occasion seperate from the headlight bulbs. This is certified as the turn expression action or blinker bulb occasion. Whether neither blinker works, you should change the bulbs. Whether this does not locate it, the disagreement may be related to your Explorer's lighting relay or automotive wiring. Finished advantage is recommended provided the dilemma is not the bulbs. Replacement of either the Chauffeur's-side or passenger's-side blinker bulb is alike.
Instructions
1. Turn the engine off. Ajar the hood. Drive the blinker bulb that you'll exchange front. The blinker situation is on the gone of the headlight contingency on either side.
2. Contemplate the existence remain the blinker instance carefully. Between the blinker case and the headlight plight is a brief Phillips screw, which attaches the blinker plight mount to the headlight case.
3. Remove the blinker case Phillips screw with a screwdriver.
4. Pull the blinker case toward you to disengage it from the vehicle. Don't pull it out too far; it's connected to the vehicle by wiring.
5. Find the black bulb socket on the back of the blinker case. Twist the end of this socket counterclockwise to disengage it. Pull it out.
Don't turn it. It will engage automatically.8. Insert the blinker bulb socket into the Explorer's blinker case.
7. Hold the edge of the blinker bulb with your gloved hand. Push it down into the socket firmly.6. Grasp the glass part of the blinker bulb gently. Pull it out to remove it. Put on your gloves and open the package that contains your new blinker bulb.
Turn it clockwise to reattach it. Push the blinker case back into position. Tighten the Phillips screw.
9. Move to the opposite side and repeat the process to replace the other blinker bulb, if necessary.
