Raptor Series
running boards are stainless steel, tubular shaped manner bars you can mount on the sides of your Ford Motor lorry or SUV. The Raptor Series is a allot of exterior accessories designed for off-roading, nevertheless suitable for on-road usage. Installing the Raptor Series running boards on your Ford Testament convey it an off-road study, bring you with a higher resale cost, and advice entry into the vehicle. Whether you own solid auto-repair skills, you can handgrip this undertaking in approximately an period.
Instructions
1. Lift the passenger side of the Ford Motor lorry or SUV off the ground with the floor jack. Move the second set of jack stands away from the Ford. Lower the passenger side of the Ford off the first set of jack stands with the floor jack.5. Repeat the first four steps on the driver's side of the Ford.
Place the right-hand Raptor Series running board on these jack stands, with the mounting brackets aligned with the factory pre-drilled mounting holes in the Ford's frame.
3. Bolt the Raptor Series running board to the Ford's frame using your socket set and the mounting hardware included with the Raptor Series running boards.
4. Habitat two of the four jack stands under the frame, elsewhere from the mill pre-drilled running board mounting holes. Lower the Ford onto the jack stands with the floor jack.2. Place the remaining two jack stands alongside the frame approximately 6-inches away.
