Provided your faucet does not deliver the correct temperature drench, adjusting it is the give back. Whether you require to escalation the maximum temperature through the douse is individual lukewarm, or intersect it to prevent imaginable scalding, adjust the inner valve accordingly. The formation is quite elementary and as great as you are comfortable with a screwdriver, it one shot takes approximately 20 minutes. No plumber is required, and much the inexperienced handyman can the works this project.
Instructions
1. Turn off the bath imbue by closing the leading H2O valve.
2. Remove the holder to the faucet. On a round, single-handle faucet, remove the cap on the top centre of the employ and remove the screw under it with an Allen wrench. On lever or straight-handle faucets, look for the screw on the side of the handle and use an Allen wrench to remove it. If the screw is a Phillips head, use a Phillips-head screwdriver.
5. Replace the handle and tighten the screw. Turn on the water and test the faucet. If you faucet does have this feature, just turn the dial to the hot marking to increase your maximum temperature or toward the cold marking to decrease it.
4. Search for a stop knob, if your faucet has no dial. This is a small knob made of plastic. It stops the handle from moving too far to the left or right. Adjust this by moving it to one side of the other. Depending on how your faucet is constructed, moving this one way or the other decreases or increases the maximum water temperature. To determine which way to turn it, note how the knob affects the position of the handle, by holding it up to the handle.
3. Pull off the handle. Look for an adjusting dial on the top of the cartridge. Some bath faucets have them, others don't. Continue to make adjustments as needed until your water temperature is just the way you want it.
