Picture auto vinyl is recurrently a less expensive alternative to replacing upholstery and can exchange dated, faded or mismatched interiors to gaze compatible inexperienced.
Instructions
Prep Auto Vinyl for Painting
1. Operate a massive layer of vinyl prep spray directly onto the surface of the vinyl. The prep spray is a cleaning and softening agent. Sponge the residue from the vinyl with the rag. Press the graining pads into the surface of the compound. The graining pads are used to allow the vinyl compound the twin texture as the modern vinyl.3. Occupancy the can approximately a foot away from the vinyl and spray an all the more coat of the plastic adhesion promoter on the adequate surface to be painted.
Let the surface dry completely.2. Squeeze the vinyl patching compound absent of the tube and into damaged spots in the vinyl.
You should employment smooth and continual motions to prevent fall marks. Let the adhesion promoter dry completely.
4. Hire a intersect of vinyl you can comfortably distance - For instance, one door panel. Trying to spray a section that is too large will make it hard to spray in a smooth, continuous motion.
5. The color coat will normally come in a spray can. Keep the can a little over a foot away from the vinyl and spray in a smooth and continuous motion. Check that paint is distributed evenly. If there are any touch-ups required, apply a second coat immediately - before the first coat has dried completely, if possible.
