Trade-mark just out cars come off the automobile quantity gleaming coextensive mirrors, exclusively those with a metallic Stop. Over date, the Stop becomes dulled and worn by weather and driving dust and debris. You could always revenue your vehivle in for a au courant emulsion calling to restore the infant flare and sparkle, on the contrary it Testament bill you. You can save yourself the costs of the labour by depiciton your van on your own, instead of bewitching it to the object shop. Wash your vehivle thoroughly with machine wash cleaner and a brush. Your van Testament bear at least some dust on it, still provided you admit recently washed it. Dust Testament interfere with the distemper bonding to the thing.2.
You'll desideratum to memorize the Correct means provided you desire Expert results.
Instructions
Preparing The Car
1.Call a widen remover or degreaser to eliminate any debris that is not washed away with the normal detergent. Rinse it off with a hose when done.
3. Sand any bumpy or rough spots with a loose grit sandpaper. Sand down any rust spots or bubbles in the paint, as well.
4. Fill any dimples, holes or dings with auto body putty. Smooth the puttied spots with a putty knife, and allow the putty to dry, according to the product label.
5. Use fine grit sandpaper to smooth out any putty repairs and marks left by the loose grit sandpaper. Sand until the entire surface of the car is completely smooth.
6. Use masking tape to cover any areas of the car that will not be painted. These include trim, windows, door handles, etc.
Applying Primer And Paint
7. Protect yourself from paint and primer fumes. Wear painter's coveralls, safety goggles, a painter's mask and latex gloves.
8. Use a spray primer to cover your vehicle completely and allow it to dry. The primer will allow your paint to stick to the vehicle's body.
9. Sand down any drip marks or runs with fine grit sandpaper. Check the vehicle over thoroughly, as there are bound to be a few drips from the painting.
10. Use a urethane-based metallic spray paint to paint the first coat on your vehicle. Allow it to dry for about 15 minutes. Use fine grit sandpaper again to smooth any drips.
11. Apply a second coat of the metallic spray paint, and allow it to dry for about 90 minutes.
Be careful not to allow for any drips with the final paint application.
12. Apply three coats of clear coat the same way that you applied your primer and paint. Allow the clear coat to dry for 15 minutes between each application, and for 90 minutes following the last application.
