Replacing the hand grips on your ATV can be a gratifying background and constitute a popular pc customized to your personality. Puttering sorrounding with your tool and creation it excelling for you is nearly as enjoyable as tearing all over the fields. Scan on to memorize exchange ATV ability grips.
Instructions
2. Dremel completed the grip with a fibre glass cut-off revolve.3.
Remove Existing ATV Grips
1. Divide down the length of the grip with a sharp overhaul ooloo.Push the nozzle of an air hose beneath the lip of the grip and allow the air pressure to break the adhesive bond. Once that bond is broken, slide the grip off.
4. Clean the metal underneath using contact cleaner or acetate. Be sure to remove all adhesive and rubber. Allow to dry thoroughly before proceeding.
5. Inspect the throttle tube for damage or extensive wear, replace if necessary.
Install New ATV Grips
6. Apply pin-sized dab of grip glue to the inside of the replacement grip.
7. Lay a thin line of grip glue around the bottom of the metal, take care to avoid the throttle tube.
8. Install the new grip.
9. Position the grip appropriately during installation as adjustments are not possible once attached.
10. Consider securing with twist wire to insure grip placement in the most extreme conditions.
