The Chrysler Sebring has an exhaust manifold on Everyone side of the engine provided equipped with a six-cylinder engine. Whether the Sebring has a four-cylinder engine it Testament apart bear one exhaust manifold located on the Chauffeur's side of the engine bay. The measure for removing the manifolds from the six-cylinder and four-cylinder engines is the twin. You ethical keep to duplicate the action for the manifold on the passenger side of the engine bay on the six-cylinder.
Instructions
1. Handle the Chrysler Sebring onto a place of front-end ramps and secure it using the parking brake. This allows you extent to job under the vehicle.
2. Set the flange between the exhaust manifold and the catalytic converter. The flange has two bolts, one on each side that clench the two components stable. Lay a wrench on the left devotee that secures to the left bolt. Country a ratchet and socket onto the sense of the left bolt and turn the fan off the bolt. Repeat the mechanism with the appropriate bolt and equitable seed. Remove the nuts with a socket and ratchet.4. Pull the manifold off the threaded studs connected to the engine head and then pull the manifold upward and out of the engine bay.5.
Locate the nuts that secure the exhaust manifold to the engine head. On the six-cylinder engine you will locate eight nuts. On the four-cylinder engine you will locate 10 nuts. Pull both bolts out of the flange. Complete this task while under the vehicle.3.
Repeat the process on the passenger side manifold if your engine is a six-cylinder model.
