Spread out motorcar damage Testament necessitate to be repaired by a known.
Plug in the hair dryer and have your can of compressed air at hand.2. Clean the area of the car where the dent is located with detergent and water, then use a towel to dry it.3.
Instructions
1. Stadium your van as rapid as you can to an electrical socket. If you don't have an electrical socket, use a long extension cord.Bitty dents to your vehivle's bodywork can happen in many ways: a Knob from a supermarket trolley, someone sitting or standing on the machine, or a mini collision in a crowded motorcar lawns. Whatever the basis, you can remove these babe dents yourself, without scrapping, filling or painting--and without paying a vast repair price. All you longing is a hair dryer and a can of compressed air.
Use the hair dryer to heat up the dented area for about three to five minutes. The metal needs to be hot, but use small, circular motions to make sure that the heat is evenly distributed. Get ready, because as soon as you turn off the hair dryer, you'll need to spray the can of compressed air.
4. Turn the can of compressed air upside down as soon as the hair dryer is off, immediately spraying the dent. Cold, liquid carbon dioxide from the can will react with the hot metal of the car's body, making the metal contract. After spraying for about 20 seconds, the dent will pop out.
5. Wait until the ice crystals that have formed melt away. This will happen naturally after you stop spraying. Wipe the area dry with a clean paper towel or cloth.
