Thanks to the Chevy S10 is a discontinued design of Motor lorry, getting replacement parts according to a door lock could be tricky. Reach inside the door and disconnect the locking knob rod, inside handle rod and inside handle lock rod from the latch assembly.6. Remove the latch assembly by removing the three screws holding it in place on the edge of the door-- these should require a Torx wrench--and pulling the assembly out of the door.
1. Roll the door's window all the hook up and disconnect the annulling battery cable provided the Motor lorry has capacity doors and/or windows.
2. Pry gone the lock and/or window controls from the door's inner trim panel. For dynamism controls, pry up the trim bezels with a trim stick and disconnect the electrical connectors. For a help window Eccentric person, encompass a hooked thing into the gap endure the Eccentric person to disconnect the clip or rub the limit of a towel behind the handle until the clip dislodges.
3. Remove the door's inner trim panel by removing all screws--some of them are behind the door handle and within the pull handle--and lifting the panel off the door.
4. Disconnect any electrical connectors behind the panel and carefully peel back the door's watershield.
5. Be confident to asset a reputable parts store that carries parts for these tucks; don't assume that parts for the S10's successor, the Colorado, Testament elbow grease with your Motor lorry. You Testament want to receive inside the door alternate the hasp.
Instructions
7. Insert the replacement latch assembly into the door and secure it with the screws, then connect all the rods on the inside of the door to the assembly.
8. Re-connect the door's trim panel and all other components, such as the switches and battery cable, in reverse order of installation.
