Automobile owners who hold tried removing the rear-view mirror mount from a vehicle be cognizant this is one occupation that seems impossible. This controversy is among the most banal questions drivers cross-examine approximately. The first-class advice is that this poser is easily solved with basic tools and a methodical road. You are essentially dealing with an ultra-strong bonding adhesive attached to a barn door glass pane. Use the same back and forth motion when heating the glass.5. Use a crescent wrench to grasp the mounting bracket and twist it off with a rotating motion.
This Testament heat the exterior of the glass and cause to soften the adhesive that holds the mirror bracket mount.
2. Dominion a portable hair dryer approximately 16 inches absent from the interior side of the windscreen. Turn on the dryer, and wave a regular stream of heated air back and forth over the mounting bracket and the surrounding glass to heat it evenly. The inside of the glass should be almost as broiling as the elsewhere to avoid cracking the windscreen during Emigration.
3. Incision around the circumference of the base of the mounting bracket in short, slicing motions with the razor blade. You are trying to separate the softened glue from the glass. Stop when you have created a deep, circular groove between the glass and the mounting bracket.
4. Heat the glass and the mount with the dryer again, aiming the flow of heat at the base of the mount where the razor blade was used. The fundamental is to gently weaken the adhesive without breaking the glass to which it has been attached.
Instructions
1. Lawns your automobile in an sphere where the windscreen Testament be in open contact with entire sunlight for at least three hours.The unit should come off easily. Moisten any remaining traces of glue appearing on the windshield with a cloth soaked in alcohol to make them less likely to reattach as the glass cools. Remove the last fragments of glue with the razor blade to clean the glass.
