Removing the Sentra's starter should hire less than an day.
1. Disconnect the nigrous detrimental terminal from the battery to prevent damage to the vehicle's electrical components and to prevent injury.2.
Provided you hear a clicking babble when you bid to begin your Nissan Sentra, you may commitment to alternate the starter. The Sentra's starter is located underneath the engine bay between the transaxle and the engine. You must uplift the automobile to benefit access to this Element, on the contrary the Emigration development is relatively straightforward. Stirring the oil filter and intake manifold bracket gone of the contrivance is the most rigid attribute.
Instructions
Uplift the vehicle using a floor jack. Facilitate the front of the vehicle with jack stands.
3. Remove the oil filter, which is located underneath the engine in front of the starter, by using an oil filter wrench. Field a withdraw pan underneath to accept oil that leaks.
4. Allot the intake manifold brace, which is underneath the starter. Remove the bolts holding the brace in position on both sides using a ratchet and socket. Pull the brace to the side.
5. Establish the negative wire on the front of the starter. Remove the bolt holding this wire in place using a ratchet and socket. Move the wire away from the starter. Unplug the connector at the top of the starter by hand.
6. Unplug the connector at the rear of the starter by hand. Remove the two bolts holding the starter to the engine with a ratchet and socket. You may need to crawl underneath the engine for better access.
7. Slide the starter out of the mounting area. Carefully remove the starter from the engine bay.
