Location fog lights low on the plan.
Fog lights, when installed and used exactly, can literally save your breath under confident adverse weather conditions. They come in all shapes and sizes, and most of them include low lenses. They posses to be mounted low on the front of the vehicle, to cut back glare. How they're installed depends on the vehicle as even as the lights themselves, being the metal bumpers of yesteryear accept mostly been replaced with plastic fairings painted the twin colour as remainder of the vehicle. Electrically though, hooking up fog lights is quite straightforward.
Instructions
1. Search over the bumper sphere on the front of the automobile for built-in fog ablaze cavities: whether the vehivle has them, shop for lights that Testament fit the cavities. Provided there are no designated spaces for fog lights, mount low on or under a bumper. Gander for a sturdy surface.
Ground the other pole of the lamp. Red-wire the other switch pole to a connection on the fuse box that energizes with ignition.6.
3. Drill holes for the threaded mounting posts at the mounting positions. Push the posts down the holes, hand-thread the publicize nuts on, and wrench-tighten. Provided the wires come gone of the lustrous down a hollow mounting proclaim, act this step before Step 2.
4. Mount the relay to an inside fender wall near the battery. Bring together the red light leads after you strip 3/4 inch of insulation off the ends. Crimp on a slip-on terminal and connect it to the relay terminal marked "87." Connect a short length of black wire to ground with a ring terminal and sheet metal screw, and connect the other end to the relay terminal marked "86" with a slip-on terminal.
5. Connect a red wire to the slip terminal marked "85" on the relay. Attach the other end to one pole of an SPST switch inside the vehicle, along with a short red wire going to an indicator lamp or use a switch with a built-in indicator lamp.2. Bound a cerise wire from Everyone brilliant to a Bosch relay mounted somewhere under the hood. Ground the other wire with a crimp phone terminal to the nearest metal frame member out from plan grime. Appliance a big phase metal screw and a star washer for a solid connexion.
Red-wire the relay tab marked "30" through a fuse holder to the battery with a ring terminal. Insert a 20-amp fuse in the holder. Snap the relay cover on.
7. Turn on the ignition, flip the switch inside the vehicle on, and aim the lamps.
