Thursday, June 18, 2015

Remove An F150 Truck Headliner

Impress it off of there.


Ford's F150 pickup has been one of the highest-selling trucks by reason of Industry began in 1970s. The F150 is recognized for both it's working faculty and comfortable interior. The headliners in your F150 add an esthetic touch to the interior of the vehicle, nevertheless can wear elsewhere over age. Removing the headliner is not a dense fashion on the other hand does share some extent and endeavor.


Instructions


1. Proceeds the dome glowing embrace off. The subsume is the undarkened plastic piece that covers the dome bright and keeps the lustrous bulb from existence damaged. Slide your flat-head screwdriver under the border of the encompass and pry it absent from the ablaze, placing it in your bucket to deal in it from getting gone.


2. Unscrew the coloured plastic lot that sits at the example of the dome shine, placing the screws in the bucket as you remove them. Pull the dome light fixture gently down from the top of the F150 truck and unplug the electrical connexion to prevent any damage as you remove the headliner.


3. Remove any handles, sun visors, mirrors and clothes hangers attached to the headliner.5. Slide the trim removal tool under the edge of the headliner and pull down gently to loosen it from the roof of the F150 truck. Work your way around the interior of the vehicle, loosening it in various spots to make sure it is completely free of the roof and trim pieces before pulling it out.


Loosen the plastic runners along the interior of the vehicle that dominion the headliner down. Each will be held in place be either screws or retaining clips. If they are held up by screws you can unscrew them, placing the screws in the bucket and the plastic liners on the seat. If they are held in place by plastic clips, place your flat-head screwdriver against the clip and push inward to release the plastic trim.


While some parts can be removed with a screwdriver, most handles in the F150 are bolted in. Benefit your ratchet and socket establish to remove any remaining parts that cannot be unscrewed.4.