Chevrolet door handles are typically mounted within the door itself, so you must entertain inside the door to detach and install them.5. Disconnect the lock rod from the inner door handle, usually by rotating it off the plastic retainer and detaching the rod, then drill out the rivets that mount the handle in place and remove the handle. Connect the replacement handle with new rivets, using a pop-riveting tool to install them.
Adjust undeniable your vehivle door windows are rolled all the plan up. Disconnect the cable on the cynical battery terminal, largely whether the motorcar has electrical controls on the doors approximating dynamism locks or windows. Remove the textbook window Eccentric person provided needed by rubbing a cloth between the holder and trim panel until the clip disengages.
2. Disconnect and remove all the electric authority switches on the door's inner trim panel. Handle a flat-blade object akin a screwdriver to pry off the bezels, lift the containment panels gone of the door and disconnect their electrical connectors.
3. Detach the bezel for the inner door operate by removing the screws with a Phillips screwdriver and prying the bezel elsewhere with a Apartment lodgings one.
4. Remove the solid inner trim panel by removing all other screws (some may be concealed under microscopic, detachable panels) and lifting the panel up and off of its fasteners. Peel away the water shield on the door.
The exact approach of Emigration and replacement varies depending on the exact base of your Chevrolet, so consult with a mechanical Professional or automotive cicerone for your mould ahead.
Instructions
1.6. Remove the outer door handle by disengaging the lock rod from the handle and lock cylinder and then removing the nuts holding the handle in place. Mount the new handle in place with the same nuts and lock cylinder.
7. Reassemble the entire door and trim panel in reverse order of removal after replacing the handles. Use new sealant to secure the water shield if needed.
