The Honda Permit is one of the most typical and most affordable cars. This machine has a express clean, all the more dependable muffler and exhaust action. Nevertheless, whether the muffler on the Honda Correspond makes a booming banging or shooting sound, or whether it leaks, it's eternity to moderate the muffler.
Instructions
1. Glimpse to descry whether you compulsion a fresh muffler on your Honda Accord by looking under the machine In relation to the back to espy whether there are any inadequate or sizeable holes in the muffler or to impel provided it has fallen off partially or completely.
2. Obtain a muffler for a Honda Acquiesce that corresponds to the duplicate year as your vehicle. Most Car parts stores inventory and sell level mufflers. Make sure you dispose the exactly muffler that corresponds with the year of your motorcar. You can also put the rear part of the car onto car jacks if desired. You will have to lie under the car to replace the muffler, so be sure to make sure the car is securely stable before attempting to remove the muffler.4. Look over the old muffler and find all of the bolts.
Putting on the astray muffler Testament not be active. You can further accede purchasing a used muffler from a junk yard, however the description will not be as good or as reliable as a new one.3. Place an old blanket or a large piece of cardboard on the ground beneath the rear part of the Accord on the ground.
Spray the fasteners generously with a penetrating lubricant before you loosen them. The penetrating lubricant will help you to remove the screws and bolts with ease.
5. Remove the old muffler. Loosen any bolts with a crescent wrench that are around the muffler and take the muffler off. If the muffler is welded on, then you can break it away by knocking it with a sledge hammer or sawing it off with a hacksaw. Dispose of the old muffler properly by breaking it down into small parts. Put the small parts in a trash bag and throw away.
6. Replace the new muffler on your Honda Accord according to manufacturer's instructions. Make sure you line it up as straight as possible with the clamps and then tighten the bolts to hold it in place. The bolts should not be too tight because the muffler needs to move slightly to prevent damage. Make sure you hang the muffler with the muffler hangers that come with it. Do not put it on too loosely or it may fall off.
