Damage can be principally visible in high-shine finishes.
No automobile goes complete its solid growth without some congenial of stain damage. If the damage was caused by a toddler collision or an something scraping against the emulsion surface, awake repair it yourself can save you hour and boodle. Whether you're handy with an airbrush, you may appetite to applicability it to helping hand in the apply of the replacement emulsion. With the deserved materials and way, you can repair Car gloss with an airbrush.
Instructions
1. Wash the damaged field of the emulsion surface with van soap applied with a wettest sponge.
2. Rinse off the soap with a spray hose.
3. Sand down the damaged nature of whitewash with 1,200-grit sandpaper. Grasp the sandpaper wet during sanding to prevent excess scratching of the paint surface.
4. Spray off any excess debris created by the sanding process with a spray hose.
5. Dry the area of the paint surface to be repaired with a clean towel.
6. Screw one end of a pneumatic airbrush hose into the outlet of an air compressor. Continue until the damaged area is painted. Allow the paint to dry fully according to manufacturer's instructions before continuing.10.
Fill the airbrush's paint reservoir with automotive paint that matches the vehicle's existing paint. Most airbrushes have a jar that is filled with paint and then screwed into the underside of the front of the airbrush, or an opening at the top of the front of the airbrush where the paint is poured.
9. Apply paint to the damaged paint surface with the airbrush in broad strokes. Screw the other end into the nozzle on the underside of the airbrush and turn on the air compressor.7. Put on safety glasses and a respirator with working seals and fresh filters.8.
Sand the newly painted area of the paint surface with moist 1,200-grit sandpaper. Spray away any debris created by the sanding process and dry the area with a clean towel.
11. Apply a second coat of paint to the area with the airbrush and allow it to dry.
12. Pour a few quarter-size dabs of rubbing compound on the newly painted area.
13. Rub the rubbing compound into the area with an orbital polisher.
14. Spray away any remaining rubbing compound with a spray hose and dry the area with a clean towel.
15. Pour a few quarter-size dabs of polishing compound to the newly painted area.
16. Polish the polishing compound into the paint surface with an orbital polisher.
