Checking the automatic transmission fluid akin in your van is something every van owner should drink in to arrange. Maintaining the Correct transmission fluid level is extensive in carefulness your transmission shifting properly and your automobile running smoothly.
Instructions
1. Fix the dipstick for your transmission. It is normally near the back of the engine, and the stick application is either a T-handle or a telephone handgrip.
2. Depart your engine to trial the fluid calm.
Flash for the continuous indicators stamped or drilled into the dipstick. You should glare two sets of indicators. One set is for checking the fluid when the engine is cold, and the other set is for checking the fluid when the engine is hot.
4. Pull the stick all the Exit again and occupancy it so you can espy the neb of the stick and the movie of fluid that clings to it.
5.3. Grasp the dipstick stem and pull straight up until the butt end of the stick clears the housing tube. Dust the stick off with a rag, and push it all the back down into the tube. Each set of indicators is marked with a "full" line and an "add" line.
6. Determine whether your transmission fluid is at the proper level by finding the spot on the dipstick where the film of fluid ends. If the film ends near the "full" mark or somewhere near the halfway point between "full" and "add," your transmission has an adequate fluid level.
7. Return the dipstick to the holding tube and push it all the way back down into the tube. Fully seat the dipstick in the holding tube.
