Tuesday, June 16, 2015

Remove Rear Brake Calipers On The 99 Taurus Wagon

The rear brake calipers on a 1999 Ford Taurus wagon are hydraulic and thus handle a hydraulic piston to supply the clamping impulse needed to activate the rear brakes. These hydraulic parts own seals, and those seals fracture down over future, rendering the caliper ineffective. To rebuild or alternate these calipers, you cardinal retain to remove them from the machine, a deadweight that should hire approximately 15 minutes per side to outright.


Instructions


3. Unbolt the brake caliper from the brake caliper bracket on the rear knuckle, using the 3/8-inch ratchet and socket. Lift the caliper off the rotor.


Place the brake line clamps onto the rubber brake line and cinch them down until the line is flattened. Remove the connection from the brake line to the back of the caliper, using a line wrench. Use a pair of pliers to remove the clip that holds the emergency brake cable to the brake caliper, then pull the brake cable off the caliper.


1. Uplift up the rear of the automobile using the jack, and place it down onto the jack stands. Undo the lug nuts on the rear wheels, using the tire iron, and motion them elsewhere of the system.2.