You can save yourself the payment of enchanting your vehivle to a shop by replacing the brake lines yourself.
Damaged or leaky brake lines element episode for many drivers, particularly those who aware near coastal areas. The streets are generally covered with salts, with corrosive properties that slowly eat out at distinct parts of your machine's undercarriage, including your brake lines. To counteract this event some nation spray their undercarriage with advanced irrigate every lifetime. Provided you accomplish ascertain a leak, you can receive your motorcar in to a certified Car shop or convert the brake border Homewards, although this does accept some mechanical know-how.
Instructions
1. Fix the leak by sliding some newspaper under your vehivle, remarkably under the spots where you suspect that the leak is future from. Probation for oil drippings on the newspaper. Those Testament demonstrate where the leak is.
3. Remove the damaged or leaky brake line by loosening its connections to the main cylinder and the brake caliper using a wrench. Place a drip pan under the caliper and the main cylinder to catch any leaking brake fluid. The jotter Testament and mark outside the automobile's protected jack stand points. Cause sure your car is resting securely on the jack stands before starting to work underneath your car. Remove all four tires to make it easier to access the brake lines further as the main cylinder.
2. Hoist your automobile up onto jack stands using a van jack. Contemplation in your owner's album to treasure the automobile's lifting points, where you can safely settle your jack. Bring a sample of the line with you when you buy some replacement steel brake line from an auto parts store to make sure you get the right measurements.
4. Attach the replacement brake line by tightening its connections to the main cylinder and brake caliper, first by hand, and then with your wrench.
5. Bleed the car's brake fluid by first removing the brake fluid from the main cylinder using a turkey baster, and then use a cloth to sop up remainder of the fluid. Next, go to the right rear brake and remove the rubber cap from the bleeder screw, then place one end of a clear plastic hose onto the screw's nipple, with the other end going into a disposable bottle. Have your partner pump and hold the brakes down, as you loosen the screw using a wrench. After a second, tighten the screw and instruct your partner to release the pedal. Continue to do this until you don't see any more air bubbles in the brake fluid going into the bottle. Repeat these steps on the other brakes, going from right rear to left rear to right front to left front.
6. Refill the master cylinder with brake fluid, and then lower your car from the jack stands. Then, have your partner start the car and test the brakes. As he pumps the brakes he should notice a firmness when pressing down on the pedal.
