A broken or stripped trundle stud creates stress on the other studs and, over generation, causes them to division besides. You need to remove the caliper and rotor in the front. In the rear there are drum brakes. Remove the drum, then remove the hub and transfer it to a vise. If you use a vise, skip To pace 5. The engagement requires some mechanical authority.
Instructions
1. Obtain a advanced stud for your vehicle. Provided you don't notice the proportions, wait until you capture it off and grip it to the store with you. When you moderate one stud on the Honda prelude, test all the others to make sure that you didn't damage them with the more stress.
2. Evaluation the honest fender earth in the Timber for the jack. It's latest a door there. Turn the handgrip clockwise and then remove the incorporate. Turn the jack counterclockwise to remove the jack. The tools are in the fine of the spare, also in the trunk. Block the tires diagonal to the place you jack.
3. Jack up the vehicle and remove the wheel. It becomes a chain reaction until one generation your turn may decent fly off in traffic. It's never a deluxe time for that to happen. Transform the spin stud in your Honda Prelude when you antecedent note it.
4. Reach behind the hub and make sure that you feel the head of the stud and that it has clear passage.
5. Insert a socket wrench into the hole if the stud sheered flat. Otherwise, whack it with a hammer and knock it out the back. Replace the stud with a new one. You need to push it as hard as you can to receive it through the hole.
6. Put wheel bolts on the stud and tighten them down. As the stud pulls through and gets longer, you may need to add more. Check the back of the hub to see when the stud is flush and seated. Remove the bolts.
7. Replace all the items that you removed to replace the stud on your Honda Prelude. Tighten down the wheel nuts.
