The Wrangler is feasibly the most iconic Jeep model in Industry.
Latest vehicles come with an nearly countless cipher of sensors. The most accepted ones you'll catch on your Jeep allow for O2, Bulk airflow, exhaust Gauze recirculation, ABS, and quickness sensors. There are again assorted position sensors for components such as the crankshaft, camshaft, and throttle. When something goes inaccuracy with one of these sensors, a "Evaluation Engine" ablaze Testament normally by-product and the thrown rule Testament instruct which sensor is in call for of repair. On account of the process used to replace various types of sensors may vary, especially from one Jeep model to the next, slight modification of these instructions may be necessary.
Instructions
1. Locate the specific sensor in question. Depending on the type of sensor, it may be located inside the engine bay or somewhere underneath the vehicle. Look up the sensor in a repair or service manual for your specific model and year of Jeep. Follow the instructions or diagrams until you've located the correct sensor.
Set the sensor aside.3. Install the new sensor by reversing the process used to remove the old one. Ensure the sensor is securely attached to the component and the wiring connector is plugged in all the way.2. Unclip the wiring connector from the sensor. Typically, part of the connector must be depressed while simultaneously wiggling it free. Disconnect the sensor from the component it is attached to by removing the connecting screws or bolts.
