Don't arouse stuck at a toll booth with an inoperable window.
Effectiveness windows are one of the most trustworthy electrical components on a vehivle. The most accepted mechanism in a influence window is the regulator. The regulator raises and lowers the window. The button-operated regulator on a power window is consonant to the regulator on a hand-cranked window. Getting to the regulator on a Jeep Grand Cherokee and replacing the regulator crave patience. Having a helper handy is definitely a deluxe essence for this repair.
Instructions
Jeep Cherokee Window Regulator Removal
1. Lower the window. Turn off the engine, emptied the hood and disconnect the anti battery cable.
2.13. Install the armrest, door pull and remaining retaining screws with a Phillips screwdriver. Push the trim plugs and door apply incorporate into levy.14.
Subsume a putty point between the door and the trim panel. Profession enclosing the all-inclusive outer wrinkle of the trim panel to disengage the retaining clips.
4. Lift the trim panel up and over the door knob. Remove the trim panel. Unplug the wiring harness from the capacity window switch panel. Remove the door trim from the vehicle.
5. Peel the irrigate deflector outside from the door. Complete not tear the irrigate deflector.
6. Pry the weather stripping and mouldings outside of the door glass opening with a putty ripper. Remove the two nuts retaining the window glass with a socket and ratchet.
7. Slide the glass until the holes borderline up with the holes in the track. Lift the glass away of the door.
8. Remove the seven window regulator-to-door and channel screws with a socket and ratchet. Loosen the lower left screw with a socket and ratchet. End not remove the screw.
9. Remove the regulator from the door.
Jeep Cherokee Window Regulator Installation
10. Install the regulator. Install and tighten the channel and window regulator-to-door screws with a socket and ratchet.
11. Slide the door glass into position. Tighten the two retaining nuts with a socket and ratchet.
12. Plug the effectiveness window electrical harness into the influence window panel. City the trim panel in position. Press the trim panel into accommodation until the retaining clips engage. A popping boisterousness is specious when the clips are busy.
Pop the plug covers and door manipulate involve off the trim with a flathead screwdriver. Remove the retaining screws from the trim panel, armrest and door handle with a Phillips screwdriver.3.
Connect the absent battery cable. Turn the ignition to the "On" position. Uplift and lower the window to check for proper operation.
