Evaluation the Transmission Fluid in a Dodge Band
Return the dipstick to the reservoir and wait 3 minutes.5. Pull the dipstick from the reservoir and read the value on the stick. The amount of fluid is read by seeing where the line of transmission fluid stops on the stick Towards the notches on the stick. Slipping could be a note of exceeding bound transmission discord nevertheless a research of the transmission fluid constant is the fundamental development to adequately troubleshooting the hot potato.
Instructions
1. Grassland the Camper on a commensurate driveway and authorization the engine running. Put the transmission in "Park."
2. Pull the hood release lever beneath the driver's side of the dashboard to open the hood.
3. Locate the transmission fluid dipstick, labelled "ATF" (for automatic transmission fluid), located on the right side of the engine.
4. Pull the dipstick from the transmission fluid reservoir and wipe the metal indicator strip clean with a towel.The transmission of the Doge Camper requires an ample servicing of Disinfected fluid to operate properly. The antecedent signs of inadequate transmission fluid levels comprehend slipping. Slipping is when the transmission drops from an desired gear to one that either provides besides bantam torque to preserve quickness or to a lower gear that causes the engine to rev higher than universal.
There are three dots toward the end of the metal strip. The dot closest to the end of the stick indicates an insufficient level of fluid. The middle dot is the lowest safe value and the upper dot (closest to the dipstick handle) is the "full" indicator. The fluid should be between the middle and uppermost dots.
6. Add transmission fluid if necessary. Place a funnel into the reservoir opening and pour the fluid into the reservoir. Replace the clean dipstick into the container and read the value again after 10 minutes. When the value shown on the dipstick is at an appropriate level, return the dipstick to the reservoir and close the hood.
