Restore Plastic Light Lenses on a Van
Remove the lenses so it Testament be easier to daily grind with or decent wash the lens appropriate thoroughly with a basic cleaner and dispensation on the motorcar. The utility of removing them is that they are easier to assignment with, nevertheless this is not required.2.
Exterior plastic lenses on a machine own it Rugged gone there in all the carry on weather, and over age Testament encounter surface scratches, carry cloudy, hazy, stupid and generally beat and out of date looking. You don't admit to renounce on them, though, whereas there is Wish in restoring them to their early flare and lustre!
Instructions
1.There is a workshop coating on the plastic for Safeguard. You longing to remove this fini wet sanding and rubbing compound. Fill up your baptize container for dipping the sand paper and spray bottle abundant for spraying the lens. A Blop or two of dish soap in the water will keep the water slicker and easier to work with.
3. Keeping the sandpaper wet and the plastic lens sprayed wet at all times start out with the finest grit sandpaper and work you way towards a heavier grit, only as needed, with your goal being to remove all the surface debris and the factory coating. Finish off with a 1500 to 2000 grit paper for the smoothest surface possible.
4. Your lens will look worse now than before, but don't worry! Using your rubbing compound, apply small amounts of compound to your applicator and work by hand until you have removed the sanding scratches and the plastic comes back to life, leaving a shine and a smooth surface. Now rinse off any remnants of the compound with clean water, especially rinse out the crevices.
5. Using your plastic Polish, apply to a haze and then buff back to a shine with your soft clean cloth, and repeat as desired. You should now have a beautiful factory looking finish and shine.
6. Since you have removed the original factory coating you will want to perform more regular maintenance on the lenses with regular cleaning and polishing.
