A cracked or broken windscreen in your Samurai is a grave holy mess.
Introduced in 1984, the Suzuki Samurai is a revamped chronicle of the Suzuki Jimny, a universal SUV that has been in fixed Industry on account of 1968. Prize any vehicle with earnest off-road capabilities, the Samurai is prone to windscreen damage. Cracks or breaks in your Samurai's windscreen are not a count you can settle off addressing. Very the skilled the police can put against you for your broken windscreen, your Samurai good isn't as protected in the advent of a collision. While it is top To look for experienced maintenance for this specific repair bother due to its dilemma, it can be done Homewards as a do-it-yourself project.
Instructions
1. Remove the windscreen wipers. Pop the cap off at the design of the wipers with a Apartment lodgings purpose screwdriver, then remove the bolt underneath with a socket. Once the bolt is removed, the windscreen wiper Testament lift off your Samurai.
2. Remove the trim from all over the windscreen of your Samurai. While this can be accomplished with a windscreen trim effects, your Apartment lodgings imagination screw driver will work just besides. Just work the edge of your tool under the trim and lift up, disengaging the clips that hold the trim to your windshield. Try not to break the clips underneath. You will need them to replace the trim later.
3. Cut through the band of urethane adhesive holding the windshield in. The band will run around the edges of your windshield, and needs to be cut away as evenly and thoroughly as possible.
4. Loosen the windshield in its frame.5. Lift the windshield by the edges and remove it from your Samurai. You should get help from a friend to do this because the windshield is both surprisingly heavy and fragile.6.
Place the edge of a crowbar under one of the bottom corners of the windshield and force it up. Once the corner is loose, continue loosening around the entire frame. Be extremely careful because it is very easy To destroy your damaged windshield at this point in the process.
Wash the frame in which the windshield sits with a clean, wet cloth, then dry it completely.
7. Paint on a flat, even coat of urethane primer over the windshield frame. The primer is what causes the adhesive to bond to the windshield, so it's vital that you ensure that it covers the area where you lay the adhesive down.
8. Use a caulking gun to set down a new band of urethane adhesive around the frame.
9. Set the new windshield into place. You'll want To possess your friend help again. Make sure the windshield lays flat in its frame, and is set in right side up.
10. Replace the trim and the windshield wipers by following steps one and two in reverse.
