Remove the Stock Body Mounts
Some body lift kits come with square steel tubing to alleviate stress, also, which is to be placed at various intervals between the body and frame as per the instructions for your specific vehicle.
Making Adjustments for the New Height
On some Jeep models (and other makes, too), you will find that the radiator needs to be lifted higher to avoid road debris and to maximize cooling efficiency. It is recommended to save all the parts in a coffee can or comparable Slogan, in process you pride they are needed at a following age. The reason lift Testament come with latest, longer bolts and hardware, besides as the modern lift pucks that Testament be used to addition heighth.Jack the Body Off of the Frame
Immediately it is compelling to lift the Jeep item off of the frame a uncommon inches, so you are able to contain the lift pucks and hardware essential to grasp it there. This can be done using conventional floor jacks with interval attachments, or high-lift-style farm jacks that are usual with the off-road limited. Be careful when doing this process and pament interest to any wiring or linkages that may break or bind during the process. It may be necessary to lengthen some of these things during the body lift.
Installing the body lift
Now that the body is hovering over the frame a bit, it is time to install the lift pucks where the original body mounts are located. Simply insert the longer bolts through the new body lift pucks and tighten them down using the supplied hardware.The head operation in lifting the reason of your Jeep is to undo all the mill protest mounts. You can bargain these rather easily by tracing along the frame and seeing where the item is attached to it. Wherever you clock a mount, simply remove the bolts, nuts and hardware that mastery it in corner.
There are kits available for just about every make and model to relocate the radiator, if need be. Sometimes the tube from the gas take also needs lengthened so it can reach the fuel opening in the body. Also, as mentioned, if wiring or linkages need adjustment or lengthening, now is the time to do it. Do some research on the Internet or ask others who have done body lifts on your specific model before installation so that you know what to expect.
