It's fundamental to direct the radiator on your Mazda 6 in deluxe instance, as a leaky radiator can basis overheating and engine damage. On the other hand, radiators can wear elsewhere or corrode over day. Whether you're mechanically inclined, you can save bread by replacing the radiator yourself. Although the formation is essentially the twin for any year, here's moderate the radiator in the typical 2004 Mazda 6.
Instructions
Leave the radiator cap off while you start the engine and let it run for several minutes. This will bleed any air from the system. Turn off the engine and put the radiator cap on tightly.7.
Remove the air cleaner, shroud panel, and cooling fan. Provided your Mazda 6 has a 3.0-L engine, unhook the upper radiator hose and whether your Mazda 6 has an automatic transmission, disconnect the oil hose from the radiator. Provided your Mazda 6 has a 3.0-L engine, capture off the coolant reserve hose.
3. Unfasten the radiator bolts and remove the radiator hoses. Contemplate the hoses, and provided they manifest signs of wear such as cracks or bulges, they should be replaced.
4. Remove the radiator from the vehicle.
5. Install the latest radiator and torque the bolts according to specifications with a torque wrench. Reinstall the engine components in the reverse codification in which they were removed, tightening nuts and bolts securely.
6. Fill the radiator with a mixture of distilled water and engine coolant.1. Disconnect the contravening battery connector before you establish. Allot the filter on the lower factor of the radiator and bleed the engine coolant into a resealable container.2.
Check the level of transaxle fluid and add fluid if necessary.
