Provided you arrangement to movement with your motorcycle, even even exigency access to a popular vehicle, bring your motorcycle along on a trailer. Awake properly load and secure your motorcycle is pivotal to safely hauling it by trailer. Be taught secure a motorcycle to a trailer with these steps.
Instructions
1. Attach ratchet straps to the sides of the trailer. Area the rear strap where you can extent it from sitting on the motorcycle, unless you hog someone to benefit you. Lay a acclivity (whether available) in the right position at the back of the trailer for loading the motorcycle.
2. Flying start the motorcycle, and let on it to balmy up. Operate it up the gradient onto the trailer or carriage beside it while rolling it beside you. Whether you don't posses a acclivity, lift the front shove onto the trailer, push it forward and then lift the rear rotate onto the trailer. Depending on the weight of the bike, you may demand another human race to maintenance you conclude this transaction.
3. Buy special motorcycle wheel chocks, or use a block of wood. This keeps the wheels from rolling backwards. Make sure the chocks are also attached to the trailer or motorcycle so they can't fall off the trailer if they become loose.
4. Reach down while sitting on the seat of the motorcycle to the rear ratchet strap. Your weight will allow the motorcycle to be secured at the correct height. The rear strap must reach the loop of soft rope that is tied around the motorcycle's rear frame. Attach a ratchet strap on each side, and tighten them while sitting on the bike.
5. Attach the front ratchet straps to the motorcycle and tighten them. There should be four short straps. Two will attach to the handle bars, while the other two will attach to the wheel.
6. Place a wheel chock behind both wheels of the motorcycle. Tie a soft rope securely encircling the rear frame of the motorcycle. The rope should be short and birr all over the frame and nailed down the rear wheel of the motorcycle. Tie the ends together to form a circle around the frame. This is where the rear ratchet straps will attach.
