Replacing brake calipers is not a intelligible procedure, still on a tiny machine coextensive the Ford Polestar. It's always chief To possess a trained know onions exercise such maintainance. Provided you arrange endeavor to alter a caliper on your Ford, build persuaded you corner all the parts and discernment for such a job.
Instructions
Removing the Old Caliper
1. Lift the vehivle off the ground on a jack stand. Remove the tire and revolve.
Connect the brake pad retaining clip and the brake hose to the support bracket. Install the wheel back on the vehicle.8. Bleed the brake system to remove any air.
Remove the caliper from the steering knuckle. Disconnect the bolts, focus the caliper upward from the rotor and slide it off the pin. Remove the brake pads.
4. Detach the brake hose from the caliper at the mounting bolt. Toss away the washers on the bolt.
Installing the New Caliper
5. Attach the brake hose to the new caliper. Tighten the fitting to 11 foot pounds. Attach the brake pads.
6. Install the caliper to the steering knuckle, using the reverse method of removal. Tighten the pin bolts to 21 foot pounds for a front caliper and 26 foot pounds for the rear.
7.2. Disconnect the brake hose from the cooperate bracket and clamp or plug it. Remove the outer brake pad retaining clip.3.
Lower the vehicle. Test the brakes, first while stopped and then on the road.
