Remove an Automatic Transmission from a Dodge Neon
Removing the transmission on a Dodge Neon is a time-consuming work that Testament grip the exactly tools and the conscientious accomplishments. The transmission on the Dodge Neon Testament amassed than possible burn outside at least one generation throughout the vehicle's activity. When this happens, you Testament keep to remove the transmission from the Dodge Neon to rebuild or alter it. Yield your allotment to all-inclusive this capacity safely and fair.
Instructions
1. Arena your Dodge Neon on a common surface. Lift the front of the vehicle with the jack and safely back it on two jack stands.
2. Remove the rear differential bolts with the ratchet allot and push the drive shaft forward using a pry bar. Apartment a empty pan under the transmission then remove the bolt securing the handle shaft to the transmission with the ratchet place. Slide the propel shaft elsewhere of the transmission and place it aside. Plug the rear of the transmission with shop rags to detain transmission oil from leaking.
3. Disconnect the automatic transmission vacuum border with the wrench, then remove the transmission oil filler tube, speedometer cable, and wires connected to the transmission and the Dodge Neon.6. Remove the torque converter bolts using the ratchet set. You will have to turn the converter using a pry bar to access all the bolts around the converter.7.
Keep the bolts and screws with their components.
5. Remove the bell housing bolts using a wrench and ratchet set. Remove the cover between the transmission and engine with the wrench.
Applicability a wrench to disconnect the cooler line from the transmission.4. Place the jack underneath the transmission and raise it enough to relieve the weight on the transmission mounts. Remove the rear transmission mounts and exhaust tube with the wrench and ratchet set.
Place the jack underneath the transmission's oil pan. Pull the transmission off the engine and lower the jack, pulling the transmission away from the Dodge Neon.
