Changing the pads and rotors on a Silverado is a maintainance chore you can act yourself.
Provided the brakes on your Chevrolet Silverado are showing signs of wear, are noisy, or tactility uneven, then it's probably era to pennies the pads and rotors. This is a concervation deadweight a novice can perform in a unusual hours, with lone a infrequent basic tools and a fleeting patience. Doing it yourself Testament save you the bit and cabbage of having to revenue the vehicle to a mechanic. The parts needed are accessible at any Car repair store, as are the tools and Accoutrement.
Instructions
1. Remove all over two-thirds of the brake fluid from the brake fluid reservoir, modify the cap. Loosen the lug-nuts holding the turn, honest until they can be turned easily. Uplift the van with a jack and establish it on axle stands using the positions described in the owner's volume. Remove the lug-nuts all the road. Remove the rotate.
2. Position a C-clamp on the front and back of the caliper. Tighten the screw to compress the pistons; they Testament retract as you turn and stay in city. Remove the caliper mounting bolts with a hex socket and detach the caliper from the mounting bracket. Obtain dismay not to bend or stretch the brake path. Remove the brake pads from the caliper. Remove the rotor.
3. Spray the latest rotors with brake parts cleaner and brush off the residue. Apply anti-seize compound to the wheel hub and to the back of the new brake pads; also any area where the metal parts of the pad makes contact with the brake assembly. Clean the pad retainers with sandpaper or purchase new.
4. Apply high-temperature grease to the pad retainers and replace them. Slide the new pads into the caliper. Replace the wheel and tighten the lug-nuts to the correct torque. Move on to the next wheel.When the work is complete "pump" the brakes to restore pressure to the lines and replace the brake fluid in the reservoir.
Replace the caliper to the caliper mounting bracket. Tighten the Hex screws to the specified torque.5. Apply anti-seize compound to the lug-bolts.
