The matter with changing the tire on a Mazda Tribute is figuring absent purchase started. It can be tricky to decide remove the spare tire from the vehicle. Instead of sitting under the Timber carpeting, it is indeed underneath the vehicle itself. Folks who don't be read this and heel up with a flat tire may treasure themselves at a loss of what to complete.
Instructions
1. Stadium the Tribute on as aligned a surface as practicable and elsewhere of the danger of traffic. Settle the vehivle in "Grounds" whether it's an automatic or in "Reverse" whether it is a jotter. Engage the parking split.
2. Expanded the hatch and bargain your jack and lug wrench. Depending on the options on your Tribute, it Testament either be under the carpeted floor near the lift gate or on the right-hand side of the freight earth last an access panel in the side wall. Remove the tools by unbuckling and pulling gone the strap or releasing the screw on the bracket, respectively. Pull the lug wrench off the jack so you can bag it to receive your spare tire.
3. Speedy the hatch and contemplate for a gap in the Centre of the appropriate half of the bumper that is slightly larger than the attitude of your lug wrench. Cover the head of the wrench into this hole and turn it counterclockwise. This will release the tire from underneath the vehicle. Pull it off of the suspension cable, unscrewing the tether with the lug wrench if it has one.
4. Use your lug wrench to turn each lug nut on the flat tire counterclockwise half a turn.
Pull off your flat tire and replace it with the spare tire. The valve stem should face towards you and the tire should be flush with the wheel hub. Tighten the lug nuts halfway by turning the lug wrench clockwise. Put your jack underneath the appropriate notch and turn its handle clockwise until you have the flat tire an inch off the ground.
6. Turn the lug nuts counterclockwise until they are completely off.5. Look for the jacking notches on your vehicle, which are small indentations underneath its frame. There is one in front of each rear tire and one behind each front tire. Turn the handle of the jack counterclockwise to lower the vehicle. Then tighten the lug nuts remainder of the way.
