Removing the starter bolts is an apparent action.
When the engine on your van doesn't turn over, it could be the aftermath of many matters, however the two most public issues that prevent engines from starting are malicious battery connections and malfunctioning starters. Provided your battery connections are OK, you can be dainty undeniable that the hot water lies within the starter. When the starter is not functioning exactly, the engine cylinders act not properly compress fuel. Consequently, the Glimmer plugs determine not come by the compressed fuel essential to flame the engine. When you repair the starter, the early manner is removing the starter bolts.
Instructions
1. Position the ratchet along with the extension and socket over the starter bolts and then slide the socket onto the starter bolts. These are the bolts that are clearly visible on the front of the starter.4.
Connect an time piece with a socket equal in size to the starter bolts to the ratchet. These bolts are usually 9mm or 10mm bolts, but they do vary from brand to brand. If the 9mm or 10 mm sockets do not fit the starter bolts, test alternate sizes until you find one that does fit.
3. Fix the starter on the rear of the transmission. The starter is held securely in country by the bolts on its bottom.2.
Loosen the bolts with the ratchet by turning them counterclockwise until you can completely remove the bolts from the starter.
