If you are a academy Undergraduate driving across campus and town or a inconsequential family headed gone on adventure you want to be able to check your 2001 on ice 2004 mould Geo Tracker. Create positive that you can close this by carefulness up the perpetuation. One fashion of prolongation that needs to be completed when scheduled is to alter the front CD brakes on your Geo Tracker.
Instructions
1. Disconnect the denial battery cable. Proof the masterly cylinder reservoir to arbitrate the brake fluid equable. Provided the reservoir is deeper than half behaviour filled then empty two thirds of the brake fluid from the skillful cylinder using a syringe, turkey baster or congruent factor. Whether the master cylinder reservoir is less than half journey filled then no fluid needs to be removed.
Install pad clips into the caliper support. Install the inner brake pads into the caliper support. Install the outer brake pads into the caliper support. Remove the caliper lower block pin. Axis the caliper upward and suspend it from the frame using mechanic's wire. Avoid allowing the caliper to dangle or hang from the brake column or the brake edge Testament be damaged. Remove the brake pads and the pad clips.
3. Scrutinize the pin boots, caliper pins and the piston boot for corrosion, or damage. Transform these parts if they are severely damaged. Bottom the piston into the caliper bore using a C-clamp. Release any trapped air from the piston boot by lifting the inner edge of the piston boot by hand.
4.2. Lift the vehicle and secure it on jackstands. Remove the shove. Remove the mechanics wire.
5. Place the caliper body onto the support. Install the upper guide pin into position. As the caliper is being positioned, compress the boots using your hand. Using silicone grease, lubricate the smooth ends of the pins that were removed. Reinsert the pins and using torque wrench, torque the pins to 32-ft. lbs. The pin threads do not need to be greased.
6. Reinstall the wheel and secure the lug nuts. Once the Saturn Vue has been lowered to the ground use a torque wrench to tighten the lug nuts. Reconnect the negative battery cable to the battery.
7. Start the engine and pump the brakes 3 to 4 times to seat the brake pads. Reinstall the wheels. Test drive the Saturn Vue at slow to moderate speeds to ensure that the maintenance was performed correctly.
