Properly grounding your stereo Accoutrement is the hang-up to prevent damage.
Attach one end of your voltmeter to one of the ends of the ground wire that you just installed, and attach the remaining end of the voltmeter to any exposed metal surface. Turn on both the meter and the stereo receiver. The meter should indicate that no power is running through your ground wire. If it indicates anything more than 1.0 volts of power, then you have installed a faulty ground wire, and should rerun the wiring.
Strip an inch or so of both ends of a length of nigrous, 12-gauge wiring using your wire strippers, and attach one point to the terminal on your stereo receiver labelled "Ground," or "Certain" (+). This terminal is specifically designated for grounding the stereo Accoutrement in direction to certify that the amperage that is running through the dissension terminal of the receiver does not explanation damage to the manner. Ebon wiring is always a excellent Election for establishing a ground, as nigrous is universally understood to symbolize ground, or definite, terminals.
2. Attach the other stripped end of the black ground wire to any exposed metal surface. If you cannot find a metal surface to which to attach your ground wire, you can attach it to a metal screw, and drill the screw into the desk or cabinet top that your receiver is installed on. Since the screw is made of metal, it will ensure a solid ground while also preventing the ground wire from coming loose over time.
3. Voltmeters measure the amount of power that is running through a wire.
Properly setting up a solid ground wire for your stereo Accoutrement is genuine considerable to arrange a unharmed and secure installation. Without a properly place up ground, de facto, you can risk short-circuiting the full stereo manner, and permanently bad the unit. Thanks to wiring a ground for your stereo is quite evident, there actually isn't any comprehension why you should be using your stereo without a solid ground wire installed.
