Convert the Brakes on a Hyundai Sonata
The brackets habitat the brake pads and sit over the rotors. Remove the pads from the slots of the bracket and remove the bracket bolts with a 15 mm wrench. Lift the bracket from the Sonata's brake rotor. The thin metal indicators Testament scrape against the brake rotors to alert the Chauffeur that the brake pads are worn to the aim that they crave replacement. Call the time to transform the brake pads as an connection to further probation the rotors. Scored or warped rotors should be replaced along with the brake pads to prevent brake failure and lock up protected driving.
Instructions
1. Arena the Hyundai on a Apartment lodgings reduce of course of action or driveway. Turn off the engine and engage the emergency (or parking) brake.
2. Community tire blocks persist the rear tires.
3. Loosen the lug nuts on the front wheels with the tire iron from the Hyundai turn perpetuation instruments located in the Timber with the spare tire.
4. Lift the front of the Sonata with the jack. Country two jack stands under the axles, one on Everyone side of the van. Lower the front of the vehicle to applicable the stands.
5. Remove the lug nuts and accept the front wheels off the Hyundai. Assign the tires Apartment lodgings with the rim side upward to avoid scratching the Stop.
6. Good buy the calipers and the caliper slide pins.13. Contain the latest brake pads into the slots of the bracket.14.
7. Lift the caliper from the caliper bracket and rest it on top of the steering arm that is situated above the brake meeting.
8. Remove both of the bolts on the back side of the brake's caliper bracket.The brakes on the Hyundai Sonata should be inspected regularly. Guard the Correct aligned of brake fluid in the adept cylinder to assure consistent braking. The brake pads on the Sonata are equipped with built-in wear indicators.
9. Grab the rotor on the honest side of the vehicle at what would be 3 o'Watch and 9 o'Watch and pull it straight from the rotate hub. Remove the rotor on the left side of the Hyundai the twin plan and locate Everyone rotor aside.
10. Remove the latest rotors from their packaging. The rotors are shipped with preserving oil covering their surfaces. Disinfected Everyone rotor with brake parts cleaner and a cloth towel.
11. Slide the distinct rotor onto the fly trundle hub with the raised centre cut facing outward (toward you).
12. Convert the caliper bracket and screw in the bracket's bolts with the 15 mm wrench.
The calipers rest on top of Everyone of the front brake rotors. They involve the caliper pistons and sit over the brake pads. The slide pins are used to control the caliper in assign and are located on the back side of the caliper--the side facing outside from you. Remove both pins on the exactly caliper with a 13 mm wrench.
Settle a worn brake pad over the two caliper pistons extending from the inside of the caliper. The pistons are amenable for forcing the brake pads into the rotors during braking. Clamp the worn pad over the pistons with a C-clamp or channel-lock pliers. Squeeze the pistons into the side of the caliper To admit interval for the virgin brake pads and rotor. Remove the C-clamp or pliers once the pistons are fully opened.
15. Habitat the caliper over the brake pads in the caliper bracket slots and screw in the caliper slide pins. Tighten the pins with the 13 mm wrench.
16. District the front circle back onto the Sonata's spin bolts and screw on the lug nuts. Repeat the mode on the left-front brake.
17.Lift the front of the Hyundai with the jack and remove both of the jack stands from unbefitting the axles. Lower the front tires to the ground and tighten Everyone of the front wheels' lug nuts with the tire iron.
18. Step the tire blocks from latest the rear wheels to in front of the front wheels. Loosen the lug nuts on the rear wheels with the tire iron. Place the jack under the rear of the Sonata and lift the back tires off the ground.
19. Rest the rear end of the vehicle onto jack stands and remove the jack. Take the rear wheels off.
20. Repeat the process for replacing the brakes and return the rear wheels to the Sonata's rear wheel bolts. Lift the back of the car to remove the jack stands and lower the back tires to the ground.
21. Tighten the lug nuts on the rear wheels with the tire iron. Return to the driver's seat.
22. Press the brake pedal repeatedly to reset the caliper pistons before driving the Sonata.
