Engine braking is the approach of slowing down a van by switching to a lower gear, and is used by drivers of tractor-trailers and cars with guide transmissions. There are times when it's all-important to manipulate the engine for braking, on the other hand for most drivers in most situations, it's not single fortuitous on the other hand harder on your motorcar than using the brakes. It's even a deluxe manner to understand. Study on to memorize purpose engine braking.
Instructions
1. Begin by taking your foot off the accelerator. Coast in gear until the engine is about to stall. If you need to slow down faster, apply the brake until the engine is about to stall.
2. Push in the clutch and apply the brake. Do this until you come to a complete stop or are traveling at the speed you want.
Shift into neutral after you come to a stop if you wish, so you can release the clutch. If you're concerned about the time it takes to shift into gear and begin moving again, you can stay in first gear and keep the clutch pushed in, but this will increase wear on the clutch and make your left leg tired.
3. Move the gearshift through the gears from the higher to lower as you decelerate, but don't take your foot off the clutch. If you find you must begin accelerating again unexpectedly (such as when the light turns green while you're decelerating), you can remove your foot from the clutch and be in the right gear for the speed you're traveling.4.
