A convertible automobile is de facto a classy and convivial body to own. On the other hand for many, the bill barrier is one that Testament never come down. So, for those human beings who vision of the wind in their hair while living on a wing and a prayer financially speaking, you can best shot to cook up your own convertible. It's a duty that requires skills with metal saws and some welding expertise on the contrary with Sufficiently motivation it can be done.
Instructions
2. Conceive your abutting chop 3 inches back from where the windscreen meets the roof, go all the way across through the horizontal part above the door windows. The point is to leave enough of a support all the way along the top of the roof so it holds in the windshield and to leave enough of a support to hold it in place. Make a similar cut along the back of the roof about 3 inches behind the point where it intersects the rear windshield. Be undeniable to roll down the windows anterior, or remove them entirely whether likely. A grinder with a cutting bit Testament as well decrease ended the metal. Cook up the cuts fair along the top of the doors as rapid to the door panel as likely.
1. Cutting the frame. Chop the frame supports on the doors of the van with a sawsall, or metal epigram.
3. Remove the roof section by hand. It should lift right off the car. Get some help for this part because the roof will be very heavy.
4. Grind down the cuts until they are flush with the frame using a grinder and you have the shape you want. Then smooth them and sand them with a wheel grinder.
5. Along the remaining roof sections install a tarpaulin grommet, the kind used for installing boat covers on boats. Then fabricate a cover with a matching attachment that fits into the grommet. This cover can be slid into the grommet. It's harder to take on and off but it will be much stronger trying to fabricate your own.
